Material: Unplasticized Poly (Vinyl Chloride)
Size: full 63mm through 400mm availability
Standard: ISO 1452-3, BS 6920, GB/T 10002.2
Color: white, blue or other colors are available upon request
Joint: joining the gasketed pipe and gasketed fittings by gasketed joint

Material: Unplasticized Poly (Vinyl Chloride)
Size: full 20mm through 250mm availability
Standard: ISO 1452-3, BS 6920, GB/T 10002.2
Color: white, blue or other colors are available upon request
Joint: joining the plain end pipe and solvent weld fittings by solvent weld joint

Material: PVC 12454
Size: 1/2" - 6"
Standard: ASTM D2466, ASTM D1784, NSF/ANSI14, NSF/ANSI16, CSA B 137.3, ASTM F1970
Color: White
Certification: cNSFus, cUPC

Material: PE 100
Size: full 20mm through 110mm availability
Pressure Rating: 1.6MPa, or other nominal pressures available upon request
Standard: ISO 4427-3, EN 12201-3, BS EN 12201-3 BS 6920

Color: blue (all size),black (dn110)

other colors are also available upon request

Joint: joining pipe and socket fusion joint fittings by socket fusion joint

Material: PE 100
Size: full 75mm through 800mm availability

Pressure Rating: l.OMPa, 1.25MPa, 1.6MPa or other nominal pressures available upon request Standard: ISO 4427-3, EN 12201-3, BS EN 12201-3 AS/NZS 4129 BS 6920

Color: blue (all size),black (dnllO or above) ,other colors are also available upon request

Joint: joining pipe and butt joint fittings by butt fusion joint

Material: PE 100
Size: full 20mm through 400mm availability

Pressure Rating: 1.6MPa or other nominal pressures available upon request Standard: ISO 4427-3, EN 12201-3, BS EN 12201-3 AS/NZS 4129 BS 6920

Color: blue, black or other colors available upon request

Joint: joining pipe and electro fusion fittings by electro fusion joint

Material: PE 100
Size: full 110mm through 800mm availability

Pressure Rating: 0.6MPa, l.OMPa, 1.6MPa or other nominal pressures available upon request Standard: ISO 4427-3 EN 12201-3 BS EN 12201-3 BS 6920

Color: blue, black with blue stripes or other colors available upon request

Angles: various angles available upon request

Joint: joining pipe and fabricated fittings by butt fusion joint

Plastic inspection chamber is used to connect drainage or sewage installation and/or to change the direction of drainage or sewerage runs, the termination of which at ground level permits the introduction of cleaning, inspection and test equipment and the removal of debris.

In recent years, all kinds of plastic drainage pipes are widely used on sewerage in municipal engineering and building area. As the advantages of light weight, good leakage resistance and convenient construction, plastic inspection chamber is widely recognized. The plastic inspection chamber can also solve the leakage of whole drainage pipe net, which was caused by deformation coefficient discordance of connections between traditional plastic pipes with brickwork/concrete inspection chamber. The plastic inspection chamber makes assembly construction of municipal and building engineer possible, and realizes the true meaning of construction integration for drainage engineer. This product is mainly used on sewerage in municipal engineering and building area.

Material: Unplasticized Poly (Vinyl Chloride)
Size: full 32mm through 315mm availability
Standard: ISO 3633, GB/T 5836
Color: white or other colors availability upon request

·Material: Brass
·Size: 1014 to 2632

·Type: Brass fittings and nickel-plated brass fitting

·Color: brassy and silver

·Standard: ASTM F 1281. ASTM F 1282

·Applications: cold water supply, hot water supply and gas supply

·Joint: Joining the pipe and fittings with mechanical compression joint